Paddigitalinput

PADDIGITALINPUT is designed to take an analog input signal (PAD) and convert it to digital output

Download Datasheet

PADDIGITALINPUT is designed to take an analog input signal (PAD) and convert it to digital with parameters for trip level and delay and configurable as float, pullup, pulldown on the input with specified impedance.

It has the following user parameters; paddigitalinput_type, paddigitalinput_threshold,paddigitalinput_impedance, paddigitalinput_filter, paddigitalinput_filter_edge.

‍

Key Features

State: pullup | pulldown | float
Filter time: 0.001 | 1000 us
Filter edge: rise | fall | both
Input impedance: 1k | 5000k
Trip level: g+vth | g-vth |60/40% | 70/30%
Testmode: no | input | output (testmode)
Vmax: 2 | 6
DFT: yes | no

Application List

Commonly used NESTO within projects converting an analog input signal to a Pad to a digital output

Die Photo

Simplified Block Diagram

Typical Application Circuit

Specification Table

Performance Curves

Evaluation

Board

Schematic

Top Layout

Bottom Layout

PC User Interface

Not required for
this reference design

Register Map

Not required for
this reference design